Product composition
This product is a one-component LED UV functional coating,adding assistants such as defoamer, leveling agent, light initiator, etc., it will be cured into a varnish paint film state after ultraviolet (UV) irradiation.
basic characteristics
Model | SC-6748 Gloss Coating Fluid |
Product Feature | High‑gloss, anti‑yellowing, excellent scratch resistance, cuttable for transfer application, alcohol‑resistant, heat‑resistant up to 210°C, cold‑resistant down to ‑40°C |
products application | Vinyl decals, PVC rolls, etc. |
appearance | Pale yellow turbid liquid |
package | 5 KG Plastic Pail |
storage | Storage temperature: 0‑50 °C, shelf life: 12 months |
technical parameter
solid content | 99% |
Viscosity | coating with 4 jar in 22 second//25℃ |
hardness | ≥3H (pencil hardness) |
glossiness | 80-85 degree(60 degree vanceometer) |
drying speed | 40-80Ft/Min/80W/Cm/Lamp |
Attention
1. Do not mix this product with other products.
2. The machine can be cleaned with alcohol after use.
3. Keep this product away from sunlight and ultraviolet rays during transportation and storage.
4. This product can be directly used at normal temperature. If it is used below 10 ℃, it should be warmed to above 30 ℃ or keep oil tank temperature to 30 ℃ + 5℃ for better coating effect.
5. Clean up in time after use, and regularly check the LED light source to prevent light decay from affecting the curing performance of the product;
6. The product is non-toxic and non-irritating after drying, but if it is stuck to the skin when liquid, it should be washed with alkaline soap more than three times within 30 minutes. The workplace must have good ventilation.
7. This information is based on our product structure and does not provide any guarantee. Please test this product and confirm its effect before use.
8. If there are any problems with the product, please contact our company as soon as possible.
